Monster Strip®
Monster Strip®
Gear Specs | |
| Brand | Rogue Fitness |
| Color | Black |
| Made In USA | Yes |
| Product Weight | 13LB (standard) / 6.75LB (Half) |
| Length | 36" (standard) / 16" (Half) |
| Width | 3" |
| Steel Notes | 3” x 3” 11-gauge Steel Tube |
| Other Product Specs | Hardware for mounting to wood studs included |
Product Description
The Monster Strip® is a unique, wall-mounted storage accessory designed—in this 3x3” version—for securely holding a wide range of Rogue Monster Series attachments. (See Also: the 2x3 Strip 2.0 for Infinity Series products and 3x3 ML Strip 2.0 for Monster Lite products)
Read More
Monster Strip®
The Monster Strip® is a unique, wall-mounted storage accessory designed—in this 3x3” version—for securely holding a wide range of Rogue Monster Series attachments. (See Also: the 2x3 Strip 2.0 for Infinity Series products and 3x3 ML Strip 2.0 for Monster Lite products)
Available in both a standard 36” length and 16” Half-Strip format, the Monster Strip channel is made from the same 3x3” 11-gauge steel tubing as our Monster rack uprights, with an MG Black powdercoat finish, 1” detent pin, and oversized mounting holes. The Monster Strip is compatible with any of the following Monster accessories:
- Monster Matador
- Monster Landmine 2.0
- Monster Vertical Mount Single Bar Holder
- Monster Rope Anchor Attachment
- Monster Plate Storage Channel (2x)
- Monster Chain Hanger
- Monster Matador Hanger
Gym owners can position The Monster Strip horizontally or vertically depending on the function required, and multiple Strips can also be installed in a series so the user can create his or her ideal custom storage set-up. For a simpler set-up, like hanging up a single Monster Matador, the space-efficient / cost-efficient Half-Strip may be the best option.
Accessories not included.
Gear Specs
Specifications
- Made in the USA
- Wall-Mount Storage Tube - 3x3” 11-gauge steel construction
- Sold Individually
- For use ONLY with Monster Series compatible accessories
- Length: 36”
- Finish: MG Black Powdercoat
- Laser-Cut Rogue branding
- For use on wood studs and concrete walls (May require the use of a stringer or additional support)
See Also:
Shipping
Rogue Fast Shipping
The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.
The 36” Monster Strip includes:
- (1) 1" x 4-1/2" detent pin
- (4) 3/8" x 2-1/2" Lag Screws for mounting to a stud*
- (4) Oversized Holes on front to allow for easy tightening of the lags
- Wallmount Hole Spacing: 8” on-center (top and bottom), 16” on-center (middle holes)
- Hole Spacing along sides: 2” on-center
- Finish: MG Black Powdercoat
- Laser-Cut Rogue branding
The 16” Monster Half Strip includes:
- (1) 1" x 4-1/2" detent pin
- (2) 3/8" x 2-1/2" Lag Screws for mounting to a stud
- (2) Oversized Holes on front to allow for easy tightening of the lags
- Wallmount Hole spacing: 12” on-center
- Hole Spacing along sides: 2” on-center
- Finish: MG Black Powdercoat
- Laser-Cut Rogue branding
*Important: If attempting to secure the Strip to a wall construction other than wood stud, the buyer is responsible for using the correct hardware. The Strip is NOT recommended for mounting to drywall or metal studs.
